Видео

Ware do you get those keys?

How did you get the new keys to work with the immobilizer. Install a new ignition cylinder, but when I turn the new keys, nothing happens? Any ideas?

If i managed to pull out my broken ignition cylinder. Its sticks but it turns as of right now. Do i have to pull the roll pin. Or can i get the cylinder out by just pressing on the steering wheel lock bit you pressed on to finally release the lock cylinder

ive done a lot of antique skeleton keys but i have not done a folger adams. fuckin cool locks. i want one of the big mortis cylinders along with one of these old jail locks. the ball barrings in those mortis cylinders are crazy.

that case is badass. I haven't seen the case before

where do you get this kit? I need something like this to get a couple of roll pins out of a Baldor grinder arbor so I can replace the bearings

hey jareth my hero locksmith in the world need your help bro mercedes benz 95 hu39 lishi the door lock A TRACK 2-8 4445434 B TRACK 1-4 2332 BUT CANT GET THE REMAINING CUTS

Could i buy a key from you if you still have them laying around?

Where can I buy this key cutting set?

Great job

Do you have a key for #21? Interested in purchase

Anyone know the value of these machine in good clean condition?

I prefer the the adc 2011 bypass cable I like the star connector don’t have to worry about breaking your probs… I done a 2021 jeep renegade today that I have to use my 12+8 on because the dine have the a spot fir the star connector on the rfhub you have to use the adc 2012 cable on the rfhub in the back of the headliner by the hatch but it was easier to use the 12+8 under the drivers side dash plus I don’t have the adc 2012 but you can use the brute force to probe the wires in the passenger side kick panel. But yeah, everybody told me that you didn’t have to plug into the OBD when I use ADC 2011, but I always had to or couldn’t get connected to the vehicle but if you use the 12+8 you don’t have to plug into the OBD I didn’t today on the 2021 renegade. My 508 has made me a lot of money but I upgraded to the 608 pro 2 about 2 months ago & it’s awesome but a lot heavier than the 508. I take of pictures of every job I do when it says successful & it’s shut lying customers up more times than I can count but yea you got to leave the ignition in the lick position to successfully program these

How do you get the software

I was today years old when I found out you are Mr. Sour. Do you remember me?

Hello I currently just bought a 2019 charger police car and the Auction lost the key. I’ve had 5 locksmiths come to make a new key and NONE have been able to get it done. For some reason it won’t allow them to get the Passcode in order to make the key. The only thing they haven’t tried is using the Brute Force cable. Any help you can give me would be greatly appreciated thanks.

Can I learn from you.

I have the destroyer kit I bought back in 2002 - nice video spot on. I’m actually doing my own this next week - I’m a locksmith

Boy, I am IMPRESSED 😂

Upon review: I think I impressioned an AM5 using an AM3…

Já deixando like

Very brilliantly done” Wow,

Congratulations on the lishi title! Almost sold my Pakapunches, glad I didn’t lol. I like that reverse pink panther music you’re using. Thanks for sharing!

Smooth as butter.. Man I want a pak a punch for schlage KW and Weiser so bad.. lol

I regret selling my punch..a few years before they became discontinued!

Pak a punches are awesome. Mine still cut “iffy” depending on the squeeze I use on the carriage. I like non electric key code cutters and picked up a couple HPC punch machines as well as the MK1 punch. I’m searching for the MK2 punch machine if anyone has one for sell. Thanks for sharing!

Silent movie style…

Too bad you can only get used ones if somebody's willing to let go of theirs.

Any tricks to reading sc1 key ways properly? I tend to get a lot of miss reads

Nice tool, great demo. Have a great day

Wow cool bro ❤

Hello Jareth, thanks for the video, do you now any other place where GM Code Killer is available? in the places i know its out of stock (transponder island and Locksmith keyless) UHS and Key Innovations do not handle them. Thanks in advance.

Just made yourself a bump key

Hi do you have a store or offer services in New York? I’d love to give you a job

Awesome piece of kit Jareth thanks for sharing. I've been thinking about these for the past week or so and boom you post a video

That's a really nice kit. I've been looking for one for a long time. Maybe someday it will materialize. Until then blue punch it is, but at least I have that sweet, sweet Herty Gerty in the wooden box. Thanks for the video,.

Maybe Framon will take up production

I still have mine as well. I have one for Kwikset and the other for Schlage. I find they can be a slight temperamental. But I think it has to do with the “squeeze” I use and how I calibrated them. I love manual punches in general. I also have a couple of the HPC manual punch machines which can do several dozen other keyways with just swapping cards. I was hoping Framon would start making these Pakapunches as they are doing other A1 products but probably won’t happen. Thanks for sharing!

I love mines, I actually have 2 of them... I have a bunch of depth knobs and carriages but cannot use most of them because they require 88 degree punch and die... Pak a punch is my go to with ford chevy.. I even use my older exacta 1 when im feeling nostalgic 😆 I have 2 electronic key machines and still love using my Pak a punch

Such a smart system.. Still had to believe they are discontinued :/ what a shame

When i try to read mecr eis it says chip no connect

Today I went to make a spare key. After the master installed the cut key, my ignition switch stopped functioning even with the original key and another master came and got it for me. It was all very quickly, he pulled out only one cylinder on the car and replaced it all on the car. Can you do the exact same thing? I was told that this is a common problem with Honda.

Can you just put your obd2 break out box in between your programmer or scan tool and jump can high and can low from the break out box to the can high and low pins on the comb?

I have one and it cuts too deep any idea on how to adjust cutting?

Hi, Are you selling any of these now?

Did you change your handle to the left side? Nice video.

Cool watching a redneck do technical stuff, given their denial of facts, reason, logic Science etc.

What is the best way to cut a HU198 key. My old SEC E9 doesn't have it in its settings since it is 1st gen. Neither does my Laser Extreme it still is a version 1 of the software. If I update the Extreme do you know if it will cut that newer ford key? TIA

I failed when it wasn’t plugged in the obd… This video saved me

Octo keys make no sense. Like why would I go through all the trouble just to pick the ignition 😂.